- 工业标准2"x1"包装
- 2:1宽输入电压范围
- 全稳压输出
- 加强型绝缘，隔离耐压8000VDC，额定工作电压1000Vrms
- 工作环境温度范围：-40℃至+85℃
- 无需最小负载
- 具备输入低电压、输出过电流、输出过电压、输出短路保护机制
- 内含电磁干扰性性(EMI)滤波电路，并通过EN 55032 Class A 认证
- 通过国际安规UL/cUL/IEC/EN 62368-1(60950-1)认证与CE标志
The MINMAX MKE15-HI series is a range of high performance 15W DC-DC converter within encapsulated 2"x1" package which specifically design for high isolation applications where reinforced insulation and high working voltage are required. There are 21 models available for input voltage of 12, 24, 48VDC with wide 2:1 input range and fixed output voltage. The I/O isolation is specified for 8000VDC with reinforced insulation, which rated for 1000Vrms working voltage. Further features include under-voltage, overload, over voltage, short circuit protection, no min. load requirement, EMI emission EN 55032 Class A approved, low I/O capacitance 80pF max. and operating ambient temp. range by -40℃ to 85℃ by high efficiency up to 90%. MKE15-HI series conform to UL/cUL/IEC/EN 62368-1 (60950-1) safety approvals. The MKE15-HI series offer a superior solution for demanding application in requesting a certified supplementary.
| Output Voltage Accuracy | ±1.0% max. | |
| Line Regulation | ±0.5% max. | |
| Load Regulation | Single | ±0.5% max. |
| Dual | ±1.0% max. | |
| Ripple & Noise (20MHz) | 5V & 5.1V | 50mVp-p typ. |
| 24V | 150mVp-p typ. | |
| Others | 100mVp-p typ. | |
| Efficiency |
Up to 90% |
|
| Working Voltage |
1000 Vrms |
|
| I/O Isolation Voltage | (Test for 1s) |
8000VDC min. (Reinforced Insulation) |
| (Rated for 60s) |
4200VAC min. (Reinforced Insulation) |
|
| I/O Isolation Capacitance |
80pF max. |
|
| Operating Ambient Temp. Range |
-40℃ to +85℃ (See Derating Curve) |
|
| Short Circuit Protection | Continuous (Auto. Recovery) | |
| Case Material | Plastic (UL94V-0 rated) | |
| Safety Approval | UL/cUL/IEC/EN 62368-1(60950-1), CB-Report, CE Marking | |
- 702台南市南区中华西路一段77号
- sales@minmax.com.tw
- (+886)6-2923150#1119
- (+886)6-2923149
- Lise-Meitner-Straße 3, D-64560 Riedstadt-Wolfskehlen
- weborder@emtron.de
- +49(0)6158-8285-0
- +49(0)6158-8285-155
- Robert-Bosch-Str. 25, 63225 Langen, Germany
- markus.mueller@eu.kagafei.com
- +49 (0) 6103 690 390
- +49 (0) 173 700 49 68
- Warwitzstrasse 9 5020 Salzburg
- austria@texim-europe.com
- +43 (0)662 216 026
- +43 (0)662 216 026-66
- Sdr. Jagtvej , 2970 Hørsholm
- nordic@texim-europe.com
- +45 88 20 26 30
- +45 88 20 26 39
- Robert-Bosch-Str. 25, 63225 Langen, Germany
- markus.mueller@eu.kagafei.com
- +49 (0) 6103 690 390
- +49 (0) 173 700 49 68
- Lise-Meitner-Straße 3, D-64560 Riedstadt-Wolfskehlen
- weborder@emtron.de
- +49(0)6158-8285-0
- +49(0)6158-8285-155
- Robert-Bosch-Str. 25, 63225 Langen, Germany
- markus.mueller@eu.kagafei.com
- +49 (0) 6103 690 390
- +49 (0) 173 700 49 68
- Bahnhofstrasse 92, 25451 Quickborn
- germany@texim-europe.com
- +49 (0)4106 627 07-0
- +49 (0)4106 627 07-20
- Martin-Kollar-Strasse 9, 81829 München
- muenchen@texim-europe.com
- +49 (0)89 436 086-0
- +49 (0)89 436 086-19
- Martin-Kollar-Strasse 9 , 81829 München
- italy@texim-europe.com
- +49 (0)89 436 086-0
- +49 (0)89 436 086-19
- Elektrostraat 17 NL-7483 PG Haaksbergen
- nl@texim-europe.com
- +31 (0)53 573 33 33
- +31 (0)53 573 33 30
| Comparison | ECAD | Model Number | Output Power | Input Voltage (VDC) | Output Voltage (VDC) | Output Current (mA) | Efficiency | I/O Isolation | Package Type |
|---|
